102 Alforim

High foaming alkaline rim and prewash cleaner

  • Maximum cleaning performance when faced with road dirt, insects, oils and brake abrasion
  • Outstanding at dissolving statically adhesive dirt
  • Protects the materials on the vehicle and the car wash equipment
  • Very dense and fine-pored foam which adheres extremely well when used in foam devices
  • Particularly effective when used in a KIEHL-BiFuTec foam system or with the KIEHL-BiFuTec foam lance
  • Also highly effective at low temperatures
  • Pleasant, subtle perfume
  • Ideally suited for use in recycling water plants
  • Environmentally aware and gentle composition
  • Highly economical thanks to the very strong product concentration
  • Free from EDTA, NTA and phosphates
Document title File type (size) Direct download Download basket
102 Alforim, Product information PDF (471 KB)
102 Alforim, Safety data sheet PDF (721 KB)
Art. No. Packaging unit (PU) Contents in kg Numbers of PU per pallet
c102081 11 kg Carwash canister - 60
c102025 25 kg canister - 24

Only use on alkali-resistant surfaces (e.g. undamaged, coated aluminium rims). Prior to use, see instructions provided by the material and surface manufacturer and check for material compatibility where required. Do not applicate on hot surfaces.

Product is suitable for pre-dilution

Apply either undiluted or prediluted to the application with a suitable dosing device. The shelf life of diluted solutions is reduced by the storage conditions and water quality. Only approved for proper use by trained personnel.

Pre- and intensive cleaner:

In low- or high-pressure systems as a spray application (car ≥ 1:60; truck ≥ 1:30).

In low- or high-pressure systems as a foam application (car ≥ 1:60; truck ≥ 1:30; 25‒30 ml/car).

Optimised for the operation with KIEHL-BiFuTec foam lances; more product is likely to be consumed when other lances are used.

Rim cleaner:

In low- or high-pressure systems as spray and foam application (rim ≥ 1:10; 20‒30 ml/car).

Foam:

In automatic car washes as active foam (5‒15 ml/car).

In automatic car washes as foam curtain (e.g. lava foam) (10‒30 ml/car).

Shampoo:

In automatic car washes as brush shampoo (5‒10 ml/car).

Ingredients (according to 648/2004/EC)

Nonionic surfactants 5–15%, alkalis, complexing agents, additives, corrosion protection, fragrances.

pH value (concentrate): > 13.5

Always keep containers closed and guide suction tubes through the closure. A change in colour and clouding may occur without any loss in quality due to the natural raw materials. In case of high water temperatures (> 40 °C) and/or water hardness (> 4.5 mmol/L ≈ 25 °dH), adding “316 Calciel” may be sensible to avoid the formation of limescale. Apply extensively to saturate the surface. Do not allow the cleaning solution to dry. No liability is accepted in case of incorrect and unprofessional use! Not a consumer product according to 1999/44/EC Art. 1! For professional use only!
EAN
4016264027826
4016264027840
4016264027901
4016264030604
Classification (in concentrate): GHS05, Danger. H314 Causes severe skin burns and eye damage. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. Contains: Sodium Hydroxide (INCI)