Thermodur-diamant
High solid acrylic emulsion polish
- Three-dimensionally cross-linked polymer emulsion for use in very highly frequented areas
- Outstanding film-forming properties
- Very high filling capacity
- High solids content
- Very good water resistance
- Extremely abrasion and scratch-proof
- Resistant to surface disinfectant products
Can be used on water-resistant, coatable, stripped floorings, e.g. PVC, rubber, linoleum, absorbent natural and artificial stone. Please perform an adhesion test before using on floorings with a PU or PE wear layer.
![](https://www.kiehl-group.com/ix_pim_assets/sym/img_Label/IM0000848.png)
Art. No. | Packaging unit (PU) | Numbers of PU per pallet |
---|---|---|
j201105 | Carton of 2 x 5 L PCR canisters | 56 |
Please test on a small inconspicuous spot before first application. Do not let the product dry on the mop. Close canister immediately after use. Avoid draughts during use and drying.
Coating:
Depending on the absorbency of the surface, 1‒2 layers at intervals of approx. 60 minutes.
Following stripping and a short drying time, apply a thin coat of undiluted product, e.g. using a flat mop or waxer. Consumption: 30.0 ml/m² per application.
To prevent changes to the maintenance film surface, cleaning products with a high solvent content may only be used for stripping. Due to a significantly increased hardening time if more than two layers are applied, in this case the coating may only be cleaned using dry methods during the first 48 hours.
![Coating Coating](https://www.kiehl-group.com/ix_pim_assets/sym/img_Piktogramm/IM0000214.png)
Ingredients
Synthetic dispersions, hard polyethylene waxes, water-soluble solvents, resins, softeners, preservatives.
pH value (concentrate): approx. 8.5
Surface in m²