Verator
Stripping intensifier
- Cleaning intensifier for mixing with Veroclean-plus
- For removing coatings which could previously only be removed partly or not at all
- Capacity to dissolve the polymer coating quickly
- Removal of epoxy resin fog
- Suitable for linoleum
Can be used on water-resistant, alkali-sensitive and alkali-resistant floorings, such as PVC, linoleum, rubber.
| Art. No. | Packaging unit (PU) | Numbers of PU per pallet |
|---|---|---|
| j155310 | 10 L canister | 60 |
Please test on a small inconspicuous spot before first application.
Preparation of the stripping solution:
Mix equal parts of Veroclean-plus, Verator and cold water.
Polymer stripping:
Distribute the stripping solution on the floor, leave to react for approx. 10 minutes, scrub, vacuum the dirty solution, then rinse thoroughly with clean water.
Removal of epoxy resin fog:
Apply the undiluted product and leave for approx. 30 minutes to react. A longer reaction time is required for heavier soiling or older stains. Remove the accumulated surface soiling with a brush, cleaning pad or scraper, and rinse with clean water. Repeat the process if necessary. Do not allow the product to dry.
Ingredients (according to 648/2004/EC)
Water-soluble solvents, solubilizers.
pH value (concentrate): approx. 9.5
pH value (ready-to-use solution): approx. 9
