INOXA Clean
Stainless steel cleaner – gel
- Maximum solubility of mineral dirt, such as cement, limescale, rust etc
- Even dissolves tough limescale and rust deposits
- The product’s high viscosity and adhesion increases the contact time and thus improves the effect (gel formula)
- The gel formula makes it easier to clean above your head and on vertical surfaces
- Creates an even, stain-free appearance on stainless steel surfaces
- Reduces resoiling and the formation of rust when used regularly
- Environmentally aware and gentle composition
- Very economical thanks to the very effective combination of active ingredients
- Free from sulphuric acid, hydrochloric acid and hydrofluoric acid
| Art. No. | Packaging unit (PU) | Numbers of PU per pallet |
|---|---|---|
| c643001 | Carton of 6 x 1 L bottles | 84 |
Product is not suitable for pre-dilution
Use undiluted and manually.
Intensive cleaner:
For stainless steel surfaces
Apply the undiluted product with a brush, sponge or cloth. Contact time: 3–5 minutes. Use a suitable cleaning pad in the case of stubborn stains.
Ingredients (according to 648/2004/EC)
Nonionic surfactants < 5%, inorganic acids, organic acids, additives, corrosion protection.
pH value (concentrate): < 0.5
A change in colour and clouding may occur without any loss in quality due to the natural raw materials. Apply extensively to saturate the surface. The plant manufacturer’s instructions must be adhered to. No liability is accepted in case of incorrect and unprofessional use!
EAN
4016264027734
4016264027727
Classification (in concentrate): GHS05, Danger. H318 Causes serious eye damage. H315 Causes skin irritation. P280 Wear protective gloves/eye protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. Contains: Phosphoric Acid (INCI)